2009/08/07

Transfection in Synthetic Media

Classé dans : Biomanufacturing, Protein and Virus Production in Mammalian Cells — Mots-clefs : — admin @ 12:22
Catalog Number Amount of reagent DNA delivered
109-TEST 0.3 ml 0.1 to 0.3 mg
109-001 1 ml 0.3 to 1 mg
109-010 10 ml 3 to 10 mg

Large volumes are available upon request
(50 ml, 100 ml, 1 L).

Please contact us.

 

Fecturin™ is ideal for the production of recombinant protein in HEK-293 and derivatives as well as in CHO cells grown either adherently or in suspension in synthetic media. This reagent is extremely gentle to cells, a strong advantage upon adaptation to suspension culture. This in turn increases protein yields dramatically. In addition, transfection efficiency with Fecturin™ ranges between 75 – 85 % (Fig. 1).

fecturin-fig1-1 fecturin-fig1-2 Figure 1. Transfection of HEK-293 and CHO using Fecturin™. Cells were seeded in either FS or C-CHO media, two commercially available synthetic media. HEK-293 (left) or CHO (right) cells were transfected with pCMV-EGFP plasmid following the standard Fecturin™ protocol. Cells were visualized by fluorescent microscopy 24 h after transfection.

 

In order to match stringent regulatory requirements in production laboratories, Fecturin™ is chemically defined and guaranteed free of any component of animal origin. Additional QC certificates may be provided upon request. Fecturin™ of various quality grades, including qualified for drug biomanufacturing, is also available upon request.

 

High levels of secreted VEGF (400 ng VEGF/106 cells/day) are obtained following transfection of HEK-293 with Fecturin™ in synthetic media. Moreover, Fecturin™ compares favourably to the commercially available reagent LP1 (Fig. 2).

fecturin-fig2 Figure 2. Compaison of protein expression levels after transfection of HEK293 cells with Fecturin™ and LP1 reagent. Suspension cells were seeded in FS medium and transfected with pCMV- Luc plasmid using Fecturin™ or LP1 following the manufacturer’s recommendations. Luciferase protein content is quantified 24 h post-transfection.

Fecturin™mediated transfection results in high levels of protein production in CHO suspension culture when compared to LP2 lipid-based reagent, in two different commercially available synthetic media dedicated to CHO cells (Fig. 3). Up to 9 µg of luciferase/106 cells/ml/day is produced using Fecturin™ in C-CHO medium.

fecturin-fig3 Figure 3. Compaison of protein expression levels after transfection of suspension CHO cells with Fecturin™ and LP2 in two commercially available synthetic media. Cells were seeded in either I-CHO or C-CHO synthetic media and transfected with pCMV-Luc plasmid using either Fecturin™ or LP2 following the manufacturer’s recommendations. Luciferase expression (RLU) was assayed 24h after transfection.

 

Upon transfection of CHO cells with Fecturin™, the daily expression of secreted VEGF (Vascular Endothelial Growth Factor) increases over four days (Fig. 4).

fecturin-fig4 Figure 4. Daily VEGF production in suspension CHO cells. Cells were seeded in C-CHO synthetic medium and transfected with pCMV-VEGF plasmid using Fecturin™ VEGF protein production was quantified by ELISA.

The cumulative VEGF production also increases steadily over 9 days (Fig. 5).

fecturin-fig5 Figure 5. Cumulative VEGF production in CHO cells in suspension. Cells were seeded in C-CHO synthetic medium and transfected with pCMV-VEGF plasmid using Fecturin™. VEGF protein production was quantified by ELISA.

 

Protein production in suspension culture of CHO cells can be easily scaled-up with Fecturin™. This reagent has been used to produce VEGF in 500 ml suspension culture of CHO cells with yields up to 10 µg of VEGF/106 cells /ml /day (Fig. 6). Protein production yield per ml increases significantly as the cell culture volume is scaled up. Protocols for 1 L or more are available upon request from our technical support.

fecturin-fig6 Figure 6. VEGF production in increasing volumes of culture. CHO cells were seeded in increasing volumes of C-CHO synthetic medium and transfected with pCMV-VECG plasmid using Fecturin™. Amount of VEGF protein produced was quantified by ELISA, 2 days after transfection.

 

Transfection in Regular Media

Classé dans : Biomanufacturing, Protein and Virus Production in Mammalian Cells — Mots-clefs : — admin @ 10:58
Catalog Number Amount of reagent Amount of NaCl solution
101-01N 0.1 ml 5 ml
101-05N 0.5 ml 50 ml
101-05 0.5 ml -
101-10N 1 ml 50 ml
101-10 1 ml -
101-40N 4 x 1 ml 4 x 50 ml
101-40 4 x 1 ml -
One ml of jetPEI™ is sufficient to perform 500 transfections in 24-well plates.Large pack sizes available upon request (10 ml, 50 ml, 100 ml and 1L).Please contact us.

 

For large scale production of recombinant proteins such as human therapeutic molecules including proteins, monoclonal antibodies, vaccine antigens and viruses  (rAAV, r-Adenoviruses and r-Lentivirus) by transient or stable transfection, jetPEITM is  the reagent of choice (Fig. 1).

Fig 1: One liter and one ml of jetPEI&trade
Figure 1: One liter and one ml of jetPEI™

By ensuring a robust, high quality DNA transfection, it leads to efficient and sustained protein expression levels and most importantly guarantees batch to batch reproducibility.

 

With a department dedicated to qualified reagents, Polyplus is able to supply any reagent grade you may require. Furthermore, the QC provided can be tailored to suit any protein production laboratory.

 

Polyplus-transfection provides prime and personalized service including scientific support to suit the pharmaceutical industry requirements.

If you wish to obtain the protocols for 1L of culture or more please contact the Polyplus scientific support specialists.

 

Polyplus-transfection jetPEI™ is also well-suited for routine virus and protein production in Flasks. For example, it is recommended by Corning for transfection of CHO and HeLa cells in HYPERflasks®.

 

Polyplus-transfection is the worldwide exclusive licensee of PEI (Polyethylenimine) and derivates for stable and transient transfection of cells.
The purchase of jetPEI™ conveys the buyer right to perform transfection using jetPEI in biomanufacturing applications.

« The use of polyethylenimine (PEI) or polypropylenimine (PPI) or cationic polymers similar in structure thereto for transfecting cells, as well as compositions comprising these cationic polymers and at least one nucleic acid, are the subject matter of U.S. Patent No. 6,013,240, EP Patent No. 0770140 and foreign equivalents, for which Polyplus-transfection™ is the worldwide exclusive licensee. »

For more information, see Licenses.